Xerox Printer Error Code 49-736 is the most common issue that users face while working with Xerox printers. This error usually means the printer has lost communication with the network or connected device, and can be caused by loose connections or settings that have changed on your wireless/router/Access Point. This error can interrupt work when you are adding a new Xerox printer or troubleshooting the existing one. Knowing what causes and ways to fix a printer with the issue so it works again. In this SEO Guide article, we’ll learn about why you come across Xerox Printer Error Code 49-736 and the step-by-step troubleshooting, as well as preventive techniques to avoid such errors in the future.
Read: How to Fix Toshiba Printer Not Printing Error
Main Reasons Behind Xerox Printer Error Code 49-736
You must be aware that Xerox Printers is one of the leaders in printer manufacturers.
There can be several causes of Xerox Printer Error Code 49-736:
- Outdated or Unsupported Printer Drivers: Unsuitable or outdated drivers may interfere with the communication between the printer and your computer or network.
- Firmware Problems: An outdated printer firmware can result in compatibility issues and subsequently errors such as 49-736.
- Network Configuration Mistakes: Wrong network configurations, like wrong IP Addresses and disabled ports, may lead to the printer not connecting.
- Firewall or Security Software: If you have an overzealous firewall or VPN client, the software might be compromising your printer’s ability to communicate over the network.
- Hardware or Connection Problems: This error can be caused by loose wires, a bad connection, or faulty hardware.
- Corrupted Print Jobs: Files that are stuck or corrupted within the print queue can disrupt printer activities.
We will show you the reasons leading to it, and once you get familiar with those, you can resolve Xerox Printer Error Code 49-736 easily.
Easy Tips to Troubleshoot Xerox Printer Error Code 49-736 Issue
1. Turn the Printer and Network Devices Off and On
Sometimes, a simple reboot is all it takes to fix a glitch that causes the Xerox Printer Error Code 49-736.
Steps:
- Turn the Xerox printer off and disconnect it from the power outlet.
- Turn off your router, modem, and any network switches.
- Wait for 3–5 minutes for all devices to power on.
- Reconnect and turn on the modem, followed by the router, then the printer.
- Test the printer to see if the issue is resolved.
Restarting refreshes network connections and also clears up minor software glitches, which makes for an effective first step.
2. Check and Update Printer Drivers
Xerox Printer Error Code 49-736: Cause of the issue. Most commonly, outdated or faulty drivers are the cause of Xerox printer error code 49-736. You do need the latest drivers.
Steps:
- Visit the Xerox official support (www. support. xerox. com).
- Search for your printer model number to find the most compatible drivers.
- If it is, download and install the appropriate driver for your operating system (Windows or macOS).
- After you have finished the installation, restart both the computer and the printer.
- Test a print job to confirm that the issue is resolved.
Managing drivers for a fleet of Xerox® devices has also been simplified using the Xerox Global Print Driver.
3. Update Printer Firmware
To solve compatibility problems and potential bugs that cause the Xerox Printer Error Code 49-736, you need to update your firmware.
Steps:
- On a web browser, type the printer IP address in your search context.
- Sign in as System Administrator(credentials would be found in your printer’s manual).
- Go to the section called “Software Upgrade” or “Firmware Update”.
- See if there are any available updates, and if you see any, then follow the onscreen instructions to install them.
- Restart the printer after the update is finished.
This printer receives regular firmware updates, so it stays ahead of new network and device features.
4. Verify Network Settings
IP conflicts and disabled ports are other ways to get the wrong network configurations and Xerox printer Error Code 49-736.
Steps:
- Log in to the printer control panel or the EWS.
- Go to “Network Settings” and make sure the printer is set for Obtain an IP address automatically (DHCP). Otherwise, assign a Static IP to prevent conflicts.
- On the EWS, browse to Settings > Network/Ports > TCP/IP >TCP/IP Port Access and set appropriate ports to Enabled.
- Verify that the Restricted server list in EWS-Settings>Network/Ports>TCP/IP is empty. If the IP address of your printer is listed, remove it.
- Save the changes and then restart the printer.
Configuration of the network. Network configurations are necessary for good communication with the printer.
5. Check Network Connections
If there are any loose connections or broken parts, you will receive the Xerox Printer Error Code 49-736.
Steps:
- If wired, check that the Ethernet cable is connected securely to the printer and router.
- If your printer is wireless, make sure the connection between your device and the access point (or router) is established and confirm that there is no interference from other devices or walls.
- Test the network by connecting another device to it and verifying that it works.
- If you are using Wi-Fi, refer to the printer’s documentation or EWS and rejoin the network.
Reliable connections are critical to the elimination of communication errors.
6. Clear Print Queue
The Xerox Printer Error Code 49-736 may appear due to stuck or corrupted print jobs.
Steps:
- On your computer, go to the printer’s queue (either through Control Panel > Devices and Printers on Windows or through System Preferences > Printers & Scanners) and check what jobs are listed.
- Delete all pending print jobs.
- If 0 remain, we can delete from its EWS the Jobs Status Queue.
- Try restarting your printer and printing once more.
By clearing the queue, you remove conflicts that can cause interference with the printer.
7. Disable Firewall or VPN Temporarily
In some cases, it may be due to firewalls or workplace VPNs obscuring the network communication of your printer, resulting in Xerox Printer Error Code 49-736.
Steps:
- Temporarily turn off your computer’s firewall protection or other security systems.
- If you are using VPN, disconnect the VPN connection and retry printing.
- If the message goes away, then you need to set up your firewall so that it will allow printer communication by adding exceptions for the printer’s IP address or ports.
- Re-enable the firewall or VPN after the test.
Doing this helps make sure that reported security settings do not interfere with the printer device functionality.
8. Reset Network Settings
In case the above steps didn’t work out with you, then resetting the network settings of the printer can offer you some help with that.
Steps:
- Go to the printer control panel or EWS.
- Click on ‘Network Settings’ then choose the option for ‘Reset Network Settings’ or ‘Restore Factory Defaults.’
- Afterward, set up the network settings (Wi-Fi or Ethernet) once again.
- Test the printer to verify that the fault is resolved.
Heavy-handed, a network reset can solve lingering configuration problems, although it will require you to set up the printer again.
9. Contact Xerox Support
If the issue Xerox Printer Error Code 49-736 continues, you can take the help of a professional then.
Steps:
- Visit www. support. Xerox. Com, and then search for your printer model.
- Connect to Xerox support online, by telephone, or live chat.
- Tell us something about the error and what steps you’ve already taken to fix it.
Sometimes the tech support will provide more advanced troubleshooting or repair.
Preventive Steps to Fix Xerox Printer Error Code 49-736 in Advance
To reduce the likelihood of future occurrence of Xerox Printer Error Code 49-736, one must be cautious:
- Keep Drivers and Firmware up to Date: Visit the Xerox website once a month to update drivers and firmware for compatibility reasons.
- Stable Network: Fast Wi-Fi/Ethernet access, will not kick you out of the network due to congestion.
- Check Printing Queue: Clean up the printing queue time by time to avoid corrupt jobs and errors.
- Set Up Your Firewalls: Add an exception for your printer’s IP address and port to the Windows firewall settings to ensure it won’t be met with blocked communication.
- Do Regular Maintenance: To avoid shooting yourself in the foot this time, clean and maintain your printer and make sure no physical part (like clogged print heads or worn-out parts) is causing errors.
- Install Compatible Drivers: Download official drivers from the Xerox website only to prevent compatibility problems.
Conclusion
The Xerox Printer Error Code 49-736 may seem like a huge roadblock, but by following the appropriate troubleshooting procedures, you can get it fixed in no time, painlessly. With a device restart, keeping your drivers and firmware up to date, checking network settings, and fixing connection issues, you can get back your Xerox printer. Putting prevention in place, as regular updates and correct network configuration, will prevent you from encountering this error again. In this post, we will discuss how you could get your Xerox printer up and running smoothly following these simple steps, so that you can continue printing. For consistent problems, please seek the advice of Xerox service or support. If your Xerox printer is kept out of any configuration defaults, you can avoid such errors occurring during printing.