Brother printers are one of the most dependable printers available on the market. It is true that any device can develop a fault, and there are times when there can be a problem with Brother printer error code e50. Error Code E50 is one such issue. It normally relates to a problem with the printer’s fuser unit. The fuser unit integrates heat to bind the toner on the paper. So any malfunctioning of this component will translate to printing problems.
In this article, we will help you to understand what Error Code E50 is, what are the common causes of it, and what steps are needed to correct the situation.
Read: How to Fix Canon Printer Error Code P08
What Does Brother Printer Error Code E50 Mean?
Brother printer Error Code E50 occurs when the fuser unit of the printer overheats or malfunctions. The fuser unit applies heat to the page to cause the toner to adhere to it, resulting in clear prints. The printer should automatically display an E50 error and cease printing since overheating and malfunctioning of this unit may cause damage.
Common Causes of Brother Printer Error Code E50
There are various reasons attributed to the triggering of the E50 error. A few of the most frequently cited are:
- Fuser unit overheating: The fuser might overheat due to excessive usage and negligence in maintaining the unit as well as improper ventilation.
- Fuser unit wearing out: Any fuser unit will, in the course of usage, wear out and of course, this will result in malfunctions.
- Electrical factors can cause power surges or other issues: An unstable power supply or surges can damage the fuser unit, resulting in error codes.
- Failure to correctly fit the replacement fuser: If you have just changed the fuser unit and it is not fitted satisfactorily, you may get the error.
Steps to Fix the Brother Printer Error Code E50
Here are some measures to assist you in fixing Brother printer Error Code E50.
1- Turn off the printer and allow it to cool off
- Step 1: Switch off your Brother printer and pull the plug out of the socket.
- Step 2: Most sources recommend making the printer rest cooled for around 10-15 minutes. It may not be anything serious; perhaps overheating is the real problem here and the fuser unit simply needs time to cool down before the unit is used again.
2- Inspect the Printer for Heat
- Step 1: Just ensure your Brother printer has been located in an area with proper ventilation. Insufficient ventilation can result in overheating of the printer caused by E50 error code.
- Step 2: Avoid placing the printer near heat sources or enclosed areas that may trap heat.
3- Removal of the fuser unit
- Step 1: Begin by removing my fuser unit by opening my printer. Please check the manual you got with your printer to find the location of the fuser unit.
- Step 2: Examine the fuser closely, paying attention to signs of external damage, such as burns, tears, warping, and so on.
- Step 3: When the fuser has visible wear and tear or damage, it may require changing.
4- Reset the Printer
- Step 1: A soft reset often clears several minor errors also. To reset your Brother printer:
- Switch off the printer by pressing the power button.
- Do not release the button that says ‘Go’ while switching it on again.
- Do not release the button until all the lights in the printer panel are lit
- Take your finger off the button and wait for the printer to resume on its own.
- Step 2: Look if the error remains after the reset.
5- Replace the Fuser Unit
If your fuser unit is broken or reaching its expected lifespan you will have to replace it. The following are the steps you will take to replace the fuser unit in a Brother printer:
- Step 1: Buy a fuser unit that is compatible with your Brother model.
- Step 2: Ensure that you have the proper tools to do the job, and then follow the user’s manual to remove and replace the fuser unit. Remember to be careful with the fuser, as it can be quite brittle and heat-sensitive.
- Step 3: After the changeover turn the printer on and see whether the error is still there.
6- Check for Firmware Updates
- Step 1: Open your web browser, go to the Brother support website, and see if you can find any firmware updates corresponding to your printer model.
- Step 2: Use the procedures provided to upgrade the printer’s firmware, as this may help replace certain affection fuser-related problems.
Contact Brother Support
If none of the above solutions work, the problem is probably more complicated. In this situation, go to Brother customer support or take the printer to an authorized service center that will carry out more diagnosis and repair.
Conclusion
Error Code E50 on your Brother printer is quite common and usual when in the presence of a cranky/overactive or overheating fuser unit itself. As annoying as this issue is, the measures discussed in this article make it possible to troubleshoot and solve it. Start with the least impact measures, which include simple, methods such as cooling the printer followed by resetting it, and if necessary, visually inspecting the fuser and replacing it should be tried. Finally, if everything fails, then use the Brother support without any further delay.
By dealing with the problem while still minor, you are preventing the likelihood of the problem from increasing to the level where the printer will be damaged and thus maintain its quality printing for a long period.